Explosion proof LED Lighting A, CI D2, 60W 8400 Lum. 5000K, 320W HID replacement

Description

A Series, 60W CI D2 Explosion proof LED fixture, 8,400 Lumen, 5000K, 100 - 277V, replace a 320W HID fixture.
A Series Explosion proof 60 Watt LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or areas where wind, water, snow or high ambient temperatures can be expected.
These Hazardous location LED lighting fixtures are designed to be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC and IEC.
Class I, Division 2
:
One of the following three situations must exist in order for an area to be considered a Class I, Division 2 location:
1.
Volatile flammable liquids or flammable gases are handled, processed or used,but the hazardous liquids, vapors or gases will normally be confined with enclosed containers or closed systems from which they can escape only in the event of accidental rupture or breakdown of such containers or systems, or as a result of abnormal operation of equipment.
2.
Ignitable concentrations of gases or vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operations of the ventilating equipment.
3.
Adjacent to a Class I, Division 1 location, and to which ignitable concentrations of gases or vapors might occasionally be communicated unless such communication is prevented by adequate positive-pressure ventilation from a source of clean air, and effective safeguards against ventilation failure are provided.
The A Series Explosion proof LED fixtures are ideal for replacing existing HPS/MH, offering higher efficacy for increased energy savings, lower maintenance costs and shorter paybacks.
These indoor / outdoor Explosion proof LED fixtures offer energy savings up to 70% and eliminate maintenance for years to come.
The indoor / outdoor Flood Explosion proof LED fixtures dimensions & weight:
10.2" L x 6.3" W x 8.1" H (deep), Weight 12#
Hazardous Location LED Lighting, 40W - 200W C1 D2 Series A Specs:
• NEMA 4X, IP66
• UL1598/UL1589A/UL844
• CSA C22.2 No. 137/No.250.0
Class I, Division 2, Group A,B,C,D
Class I, Division 1, Group E,F,G
Class II, Division 2, Group E,F,G
Class III
• IECEX
• ATEX
• L70 50,000 hours
Only Non dimmable in stock
Color Temperature 3000K to 6500K,
Note! 5000K stock
CRI > 80
Beam Angle 120º
Operation Temperature -40ºC to 60ºC
Efficiency More than 130 LPW
Input Voltage AC100-277V/ 200-480V,
Note! 100 - 277V stock
Frequency 50-60Hz
Power Factor More than 0.90
Rated Life 50,000 hours
LED Type Cree LED Chips
Contact us if you would like a Spec sheet, or Explosion proof Certification.
5 Year Warranty
Please, make sure that the Explosion proof fixture you are buying has the proper certification, see above for the various certifications needed.
Some are selling non-certified LED fixtures, this can be quite dangerous!
Contact us to request a Spec sheet, or a link to the Explosion proof Certification page at ETL.
Please, ask any questions, or request links, spec sheets, certification etc. before placing an order
We have usually 10 - 100 units available. If more than one is needed, please contact us.
Price discount is available for quantities over 5 units.
Please note!
If fixtures are returned for any reason other than a Warranty issue, we will deduct the freight cost to the customer from the refund, usually around /each.